|
* Frequency Range: 0.5Hz to 5MHz
* Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS output
* External Voltage Controlled
Frequency (VCF) function
* Duty cycle control with signal
inversion capability
* Variable DC offset control
* Two-step (-20dBx2) and variable attenuator
* Built-in 6 digit high resolution counter with INT/EXT function up to 150MHz
* INT./EXT. AM/FM Modulation
* LIN/LOG Sweep Mode
* GCV Output for synchronization
| Main |
Frequency
Range |
0.5Hz - 5MHz(7 Ranges) |
| Amplitude |
>10Vp-p
(into 50Ω
load) |
| Impedance |
50Ω ±10% |
| Attenuator |
-20dB ±1.0dB X2, continuously variable |
| DC Offset |
±10V(±5V into 50Ω load) |
| Duty
Control |
80%: 20%: 80% to 1MHz continuously variable |
| Display |
6 digit LED
display |
| Sine
Wave |
Distortion |
≤1%, 0.5Hz - 100kHz
|
| Flatness |
≤0.3dB, below 500kHz; ≤1dB,
below 5MHz
|
| Square
Wave |
Symmetry |
±2%, 1Hz - 100kHz |
| Rise
or Fall Time |
≤50ns
at maximum output (into 50Ω load) |
| Triangle
Wave |
Linearity |
≥98%, 0.5Hz - 100kHz; ≥95%,
100kHz - 5MHz
|
| CMOS
Output |
| Level |
≤4Vpp±1Vpp
- 14.5Vpp±0.5Vpp adjustable |
| Rise
or Fall Time |
≤120ns |
| TTL
Output |
Level |
≥ 3Vp-p |
| Fan Out |
20 TTL load |
| Rise
or Fall Time |
≤25ns |
| VCF |
Input
Voltage |
0 - 10V ±1V
for 100:1 frequency ratio |
| Input
Impedance |
10kΩ±10% |
| GCV |
Output Voltage |
To set the
voltage between 0V - 2V as per different frequency |
| Sweep
Operation |
Sweep/Manual |
Switch
selector |
| Sweep/Rate |
100:1 ratio
max. and adjustable |
| Sweep/Time |
0.5 sec. -
30 sec. adjustable |
| Sweep/Mode |
Lin./Log.
switch selector |
| Sweep/Out |
0V - 10V±1V |
| Amplitude
Modulation |
Depth |
0 - 100% |
| MOD. Frequency |
400Hz (INT), DC - 1MHz(EXT) |
| Carrier BW |
100Hz - 5MHz (-3dB) |
| EXT Sensitivity |
≤10Vpp for 100% modulation |
| Frequency
Modulation |
Deviation |
0 - ±5% |
| MOD. Frequency |
400Hz(INT), DC 20kHz(EXT.) |
| EXT. Sensitivity |
≤10Vpp for 10% modulation |
| Frequency
Counter |
Int./Ext. |
Switch
selector |
| Range |
0.5Hz - 5MHz
(5Hz - 150MHz EXT.) |
| Accuracy |
Time base
accuracy ±1
count |
| Time
Base |
±20ppm(23°C ±5°C)
after 30 min. warm up
|
| Resolution |
100nHz for 1
Hz, 1Hz for 100MHz |
| Input
Impedance |
1MΩ/150pF |
| Sensitivity |
≤35mVrms(5Hz
- 100MHz); ≤45mVrms(100MHz
- 150MHz)
|
| Power |
115/230 VAC ±15%,
50/60Hz |
| Size |
9.9" W X
11.5" D X
3.6" H |
| Weight |
5.3 lbs. |
| Accessories |
BNC-alligator
lead (GTL-101) X
2, manual, power cord |
Instek Function Generators
Comparison Table
|
