* Built-in 1MHz Function Generator
* 20 MHz, Dual Channel
* High sensitivity 1 mV/DIV
* TV synchronization
* ALT triggering Function
* Z-axis input
* CH1 output
* Two years factory warranty
* Economic Choice for High Quality

CRT	Type	6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm)
	Z - Axis Input	Sensitivity: Above 5Vp-p Max Input Voltage: 30V (DC+AC peak) Bandwidth: DC - 2MHz
	Phosphor	P31
	Accelerating Potential	2 kV
	Polarity	Positive-going input decrease
	Focus Control	Auto focus
Function Generator	Frequency Range	0.1Hz - 1MHz (7 range)
	Waveform	Sine Wave, Square Wave, Triangle Wave
	Frequency Variable Range	10:1 or more
	Output Impedance	50Ω±10%
	Voltage	Over 14Vpp (open circuit) continuous conversion DC offset possible over ±6V when open
	Sinewave Distortion	2% Max. (10Hz - 100kHz)
	Squarewave Asymmetry	±3% or less (in 1kHz maximum)
	Squarewave Rise/Fall Time	50Ω output:120nS or less
Vertical System	Sensitivity	5mV - 5V/DIV ± 3%, 1mV - 1V/DIV±5% (using X 5MAG)
	Bandwidth	DC to 20MHz (X 5MAG:DC to 7MHz)
	Rise Time	17.5nS (50nS at X 5MAG)
	Max Input	300V (DC+AC peak) at 1kHz
	Input Impedance	Approx. 1MΩ / 25pF
	Input Coupling	AC, DC, GND
	Vertical Mode	CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV
Horizontal System	Sweep Time	0.2µS / DIV - 0.5S / DIV±3%, (±5% at X 10MAG)
	Max Sweep Rate	100nS / DIV (20nS and 50nS / DIV are uncalibrated)
Trigger	Trigger Mode	AUTO, NORM, TV-V, TV-H
	Trigger Source	CH1, CH2, ALT, LINE, EXT
	Trigger Slope	"+" or "-"
X - Y Operation	Sensitivity	5mV - 5V / DIV±4%
	X-axis Bandwidth	DC - 500kHz
	Phase Error	3º or less from DC - 50kHz
Output Signal	Trigger Signal Output	Voltage: 20mV/DIV into 50Ω Bandwidth: 50Hz to 5MHz (-3dB) Impedance: 50Ω
	Calibrator Output	1kHz Squarewave, 2Vpp±2%
Power Source	AC 115V/230V ± 10%, 50/60Hz
Accessories	Power cord, manual, probes(10:1/1:1) X 2
Size	12.2"(W) X 5.9"(H) X 17.9"(D)
Weight	18.7 lbs.