* 50 MHz, Dual Channel
* Delayed Sweep
* Built-in Delay Line
* TV Synchronization
* Z axis input
* ALT Triggering Function
* Hold off Function
* Trigger level lock function
* CH1 output
* Two Year Factory Warranty

This scope is ideal for advanced service application. Delayed sweep allows the expansion of portion of curve for detailed analysis of spike and glitches. Signal delay line permits viewing leading edge of displayed waveform.

CRT	Type	6-inch rectangular type with internal graticule 0%, 10%, 90% and 100% markers. 8 X 10 DIV (1 DIV=1 cm)
	Z - Axis Input	Input Impedance: 5kΩ Sensitivity: Above 3Vp-p Bandwidth: DC - 5MHz
	Phosphor	P31
	Accelerating Potential	12 kV
	Illumination	Continuously adjustable
Vertical System	Sensitivity	5mV - 5V/DIV ± 3%, 1mV - 2mV / DIV±5%
	Bandwidth	DC - 50MHz DC - 15MHz at 1mV - 2mV / DIV
	Rise Time	7nS (23.3nS at 1mV - 2mV / DIV)
	Input Impedance	Approx. 1MΩ
	Input Coupling	AC, DC, GND
	Vertical Mode	CH1, CH2, DUAL, ADD, CH2 INV (Dual automatic switching ALT and CHOP)
	Signal Delay	Leading edge can be monitored
Horizontal System	A (Main) Sweep Time	0.1µS - 0.5S/DIV ± 3% 100nS - 50mS/DIV ± 5% (X 10MAG) 10nS - 50nS ± 8% (x 10MAG)
	B (Delay) Sweep Time	0.1µS - 0.5mS / DIV ± 3% 100nS - 50µS / DIV ± 5% (X 10MAG) 10nS - 50nS / DIV ± 8% (X 10MAG)
	Delay Time	1µS - 5mS, ±5%
	Delay Time Jitter	Better than 1:10000
Trigger	Trigger Mode	AUTO, NORM, SINGLE
	Trigger Source	CH1, CH2, ALT, LINE, EXT
	Trigger Coupling	AC, DC, HF, REJ, TV
	Trigger Slope	"+" or "-"
X - Y Operation	Sensitivity	5mV - 5V / DIV±4%
	X-axis Bandwidth	DC - 2MHz
	Phase Error	3º or less from DC - 100kHz
Output Signal	Trigger Signal Output	Voltage: 50mV/DIV into 50Ω
	Calibrator Output	1kHz Squarewave, 2Vpp±2%
Power Source	AC 100V / 120V / 220V / 230V ± 10%, 50 / 60Hz
Accessories	Power cord, manual, probes(10:1/1:1) X 2
Size	12.2"(W) X 5.9"(H) X 17.9"(D)
Weight	18.1 lbs.