* 200 MHz, Dual Channel, Delayed Sweep
* Built-in 6 Digit Universal Counter
* Auto Set
* TV-Line Selection (NTSC, PAL, SECAM)
* 10 Sets Memory for Front Panel Setting Save & Recall
* Cursor Readout with 7 Measurements
* Panel Setup Lock of Digital-Control Functions
* Buzzer Alarm
* LED Indicators
* Trigger Signal Output
* Z-Axis Modulation Input
* SMD Technology, High Stability and Reliability

CRT	Type	6-inch rectangular type with internal graticule 0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)
	Phosphor	P31
	Accelerating Potential	14kV
	Illumination	Continuously adjustable
	Z-Axis Input	Coupling: DC Sensitivity: 5V or more Maximum Input Voltage: 30V (DC+AC peak) at 1kHz or less Bandwidth: DC ~ 5MHz
Vertical System	Sensitivity	2mV ~ 5V / DIV,11 step in 1-2-5 sequence
	Sensitivity Accuracy	≤3% (5 DIV at the center of display)
	Vernier Vertical Sensitivity	Continuously variable to 1 / 2.5 or less panel-indicate value
	Bandwidth (-3dB)	DC ~ 200MHz (2mV/DIV : DC ~ 20MHz)
	Rise Time	1.75nS (2mV/DIV : 17.5 nS)
	Signal Delay	Leading edge can be monitored
	Max. Input Voltage	400V (DC+AC peak) at 1kHz or less
	Input Coupling	AC, DC, GND
	Input Impedance	1MΩ±2% // approx. 25pF
	Vertical Mode	CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV
	Bandwidth Limited	20MHz
	Common-Mode Rejection Ratio	50 :1 or better at 50kHz
	Dynamic Range	8 div at 100MHz, 5 div at 200MHz
Horizontal System	Horizontal Modes	MAIN (A), ALT, DELAY (B)
	A (main) Sweep Time	20nS ~ 0.5S / DIV, continuously variable (UNCAL)
	B (delay) Sweep Time	20nS ~ 50mS / DIV
	Accuracy	±3% (±5% at X10 MAG)
	Sweep Magnification	X10 (maximum sweep time 2nS / DIV)
	Hold Off Time	Variable
	Delay Time	1µS ~ 5S
	Delay Jitter	Better than 1:20000
	Alternate Separation	Variable
Trigger	Trigger Modes	AUTO, NORM, TV
	Trigger Source	CH1, CH2, LINE, EXT, EXT/10
	Trigger Coupling	AC, DC, HFR, LFR, NR
	Trigger Slope	"+" or "-" polarity or TV sync polarity
	Trigger Sensitivity	Mode Frequency INT EXT EXT/10 AUTO 10Hz~20MHz 0.35 DIV 50 mV 500 mV 20MHz~200MHz 1.5 DIV 150 mV 1.5 V NORM DC~20MHz 0.35 DIV 50 mV 500 mV 20MHz~200MHz 1.5 DIV 150 mV 1.5 V TV sync signal 1 DIV 200 mVpp 2 Vpp
	Trigger Level Range	INT: ±4DIV or more EXT: ±0.4V or more EXT/10: ±4V or more
	TV Triggering	TV-V, TV-H, TV-LINE
	TV-Line Selection	Standard Filed 1 Filed 2 NTSC (525H) 1H~263H 1H~262H PAL (625H) 1H~313H 1H~312H SECAM (625H) 1H~313H 1H~312H
	Max. External Input Voltage	400V (DC+AC peak) at 1kHz
	External Input Impedance	1MΩ±5%, // approx. 25pF
X-Y Operation	Mode	X-axis: selectable CH1, CH2, EXT, EXT/10 Y-axis: selectable CH1, CH2, CH1 and CH2
	Sensitivity Accuracy	2mV ~ 5V/DIV ±3% EXT: 0.1V/DIV ±5% EXT/10: 1V/DIV ±5%
	X-axis Bandwidth	DC ~ 500kHz (-3dB)
	Phase Error	3º or less from DC ~ 50kHz
Output Signal	Trigger Signal Output	Voltage: approx. 25mV/DIV into 50Ω Frequency response: DC ~ 10MHz
	Calibrator Output	1kHz Squarewave, 2Vpp±2%
Cursor Readout Function	Cursor Measurement Function	ΔV, ΔV%, ΔVdB, ΔT, 1/ΔT, ΔT%, Δθ
	Cursor Resolution	1 / 100 DIV
	Effective Cursor Range	Vertical: ±3DIV Horizontal: ±4DIV
	Panel Setting Display	Vertical: V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND Horizontal: S/DIV (MTB,DTB), UNCAL, X10MAG, delay time, HO Trigger: source, coupling, slope, level, TV-V, TV-H Others: X-Y, lock, save/recall MEM 0-9
Auto Measurement Function	Parameter Function	FREQ, PERIOD, ±WIDTH, ±DUTY ( + or - polarity selected by trigger slope)
	Display Digits	Max. 6-digits, decimal
	Frequency Range	50Hz - 200MHz
	Accuracy	1kHz - 200MHz: ±0.01% 50Hz - 1kHz: ±0.05%
	Measuring Sensitivity	>2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)
Special Function	Auto Set	Input Channel: CH1, CH2 Frequency Response: 50Hz~50MHz
	Panel Setting Save & Recall	10 sets
	Panel Setups Lock	Provided
Power Source	AC 100V / 120V / 230V±10%, 50 / 60Hz
Accessories	Power cord, Instruction manual, Probes(10:1/1:1)
Size	12.2"W X 5.9"H X 18.5"D
Weight	19.8 lbs.